Auto centrifugal galvanizing plant
- Categories:Galvanized equipment
- Time of issue:2021-09-27 13:53:39
- Views:0
Equipment Briefing
|
Item |
Equipment specifications |
|
Workpiece |
Tools and standard parts |
|
Mode of pretreatment |
Shot blasting for rust removal, gantry barrel automatic pretreatment |
|
Capacity of pretreatment |
200 kg per barrel, 2.5 tons per hour |
|
Energy for fluxing drying |
Recovered the waste heat from the flue of a zinc kettle furnace |
|
Drying mode |
Mesh and belt drying |
|
Galvanizing mode |
Automatic galvanizing, rail type, with mobile gripper |
|
Galvanizing capacity |
No more than 50kg/frame basket, 1.5-2.5t/hour |
|
Daily capacity |
30-50 tons |
|
Galvanizing basket |
6 units, the size of workpiece is no more than the basket. |
|
Zinc kettle size |
Customized dimensions |
|
Energy |
Natural gas |
|
Heating mode |
Pulse combustion heating |
|
Galvanizing temperature |
525-575℃ |
|
Post-treatment |
Transport with stainless mesh and chain, water cooling in stainless tank |
|
Acid mist treatment |
Enclosed pretreatment for acid mist collection, acid proof blower for induced air ventilation, acid mist absorb by neutralization spraying system |
|
Zinc smoke treatment |
Side and top capturer nearby the zinc pot. Bag filter for zinc dust, blower for induced air, deamination in spray tower |
Supporting Equipment
1. Acid storage and supply equipment
○ Option with vertical and horizontal acid tank.
○ Acid pump fulfills the task to transfer the acid between the acid tank and the acid baths.
○ No leakage, safety and environmental friendly.
2. Acid collection and scrubber
○ Good sealing of the acid pipelines and the acid mist blower, no leakage.
○ Automatic alkaline feeding and PH value checking
○ Multiple level alkaline spray, fully neutralization reaction of the acid mist.
3. Zinc smoke/dust collection and treatment equipment
○ Good seal of the dust suction hood, pipeline and the blower, no leakage.
○ The filter cloth has good performance to stop the dust particles, the particle discharge can reach the required domestic and overseas clean air standards.
○ The blower running speed is adjusted automatically according to the concentration of the dust particles, electricity cost is optimized.
4. Waste heat recovery boiler
○ The tail waste heat from the zinc kettle heating furnace is fully utilized, energy consumption is optimized.
○ High temperature steam is generated from the boiler for good performance of the inner blow.
○ Automatic control, no special guardian needed.
5. Deironing separator from Fluxing chemical
○ Continuous operation, good performance of deironing
○ Automatic control, no special guardian needed
6. Zinc pump
○ Big flow capacity, long lifetime and easy operation.
7. Zinc dross filter
○ Thorough cleaning of the zinc dross, no blind angle inside the zinc kettle, easy operation.
“ If you have any questions, please leave a message. ”
International Trade Unit: TianJin Hessing Auto Galvanizing Equipment Co., Ltd. | Add: 21-1, JinLian Industrial Zone, JinNan District, TianJin, China
North American Office: Hessing Galvanizing Equipment Co. | Add: 68 Wheelwright DR, Richmond Hill, Ontario, Cananda